|
|
How long has it has been since you have started the engine on your boat?
After a couple of days of just sitting, any protective oil that was left
on the bearings is almost gone, basically leaving a "dry start"
metal to metal condition the next time you start that engine.
| Facts... |
|
•
|
80% of all engine wear occurs at startup. The
longer it has been since an engine was last started the greater potential
for wear! |
|
•
|
Pre-Lubricating any engine before it is started
will decrease or eliminate the overall wear normally associated with
the "dry starting" of an engine, thus extending engine life. |
 After
a week, even oil that normally is in the small oil passages and oil galleys
has run back into the oil pan, making the initial starting of your engine
even harder on the bearings and valve train components. Why? Because now
when starting the engine the oil pump has to fill all of the oil passages
before any oil gets to your bearings or valve train...on some engines
this can take 5-10 seconds or MORE.
Extend the life of your expensive boat engine, reduce
maintenance, and make starting easier, with the MasterLube Prelubrication
system. Boats of all types, sizes and uses can be protected. With models
to fit almost any application, we welcome the opportunity to build custom
models for those "unique" applications, usually for little if
any extra from our kit pricing. Call us for details.
Models that we have pre-made applications for:
• Fishing, Skiing, all purpose styled boats with inboards/outboards
• V-drive MasterCraft and Ski-Nautique styled ski/recreation
boats
• Cigarette and Offshore Racing style with single or multiple
engines
• Sailboats, both diesel and gasoline auxiliary/emergency engines
• Generators, or pumping engines
Other Applications
Marine | Racing
| Street Rod | Exotic
• Collector | Motorcycle
Classic • Stock • Antiques |
Commercial | Tow Vehicles | Aviation
|
 |
 |
"My boat usually sits
for a week or two without being started... this has always bothered
me, as has that knocking and ticking noise in the first few seconds
when I first started it ...those noises were not there when the
boat was new. Since installing your 3 quart MasterLube model, the
boat starts just like new, without the noises! Thanks for a great
product."
— J. Anderson |
  
|
|
